Classification of cloth hose

Date:22-02-2020
Abstract:

Cloth clamped hoses can be divided into cloth clamped s […]

Cloth clamped hoses can be divided into cloth clamped sandblasted hoses for sandblasting (or iron shot) derusting and metal cleaning on wind pressure sandblasting machines. Features The inner rubber has good abrasion resistance. The burst pressure of the hose is not less than four times the working pressure. The application of cloth water conveying hose is suitable for conveying water and general neutral liquid at normal temperature in mining, factories, agriculture, forestry and civil engineering. Features Hose is lightweight, with good softness and aging resistance. The burst pressure of the hose is not less than three times the working pressure.

Cloth acid and alkali resistant hose application Suitable for transporting neutral liquids not higher than 45 ℃, dilute acid and alkali solutions (except nitric acid) with a concentration below 40%. Features Adhesive layer has good acid and alkali resistance. The burst pressure of the hose is not less than four times the working pressure. The cloth hose products include: oil suction hoses, steam hoses, sand blasting hoses, food hoses, oxygen blowing hoses and various special-shaped hoses. They are widely used in machinery, chemical, petroleum, metallurgy, food and other industries. Product Name Inner Diameter (mm) Performance and Use Remarks Steam hose 6-76 transports saturated steam or superheated water below 170 ° C, working pressure is 0.3Mpa steam. Hot water 0.8Mpa. Oil-absorbing rubber hose with outer armor structure can also be used -152 Suction gasoline, engine oil, lubricating oil and other mineral oils at normal temperature, working pressure is 0.5-1.2Mpa, suction and suction food hose 16-152 attracts milk, alcohol, edible oil and liquid beverage, working pressure is 0.5- When transporting concentrated acid at 0.8Mpa, the inner rubber layer can use butyl rubber, and the cloth layer can use glass fiber.

Acid and alkali hoses 19-203 deliver dilute acid and alkali solutions at room temperature. The working pressure of 0.5-0.7Mpa cement tank truck hose can also be produced according to this. Wear-resistant sandblasting hose 19-76 wind pressure sandblasting hose, working pressure is 0.6Mpa water tank bend pipe 25-102 locomotive water tank water delivery drilling hose. 51-102 is pressure-resistant, abrasion-resistant, and oil-resistant, and is used as a flexible connecting pipe between a rig tap and a riser flange of a drilling machine. The working pressure is 10-30Mpa.

There are metal joints at both ends. Nylon wire is wound around the oxygen hose. 51-127 Flexible connection tube for pure oxygen top-blown converter. The working pressure is 1.5Mpa. The steel wire braided buckle type can also be used. The working pressure can reach 8Mpa. Blue, with an asbestos protective layer. Exhaust (suction) mud hose 196-900 for dredging (sucking) of dredgers, working pressure is 0.4-0.5MPa. According to the design requirements, it can be used for making holes for engineering constructions such as 25, 32, 40 bridges and highways with flange joints, and can withstand a tensile force of 1.5-2.30kg / piece. The outer layer has good tearing properties.